Knowledge

Working principle of audible and visual alarm

Nov 09, 2021 Leave a message

1. The audible and visual alarm is an audible and visual alarm equipment installed on the site. When a fire occurs on the site and is confirmed, the fire audible and visual alarm installed on the site can be started by the fire alarm controller in the fire control center to send a strong audible and visual alarm signal, so as to remind the on-site personnel to pay attention.


2. The acoustooptic alarm uses the sound effect chip to amplify through the triode and transformer to push the speaker to make sound; The timing circuit is used to control the super bright led to send out a flashing optical signal. When a fire occurs on site and is confirmed, the fire audible and visual alarm installed on site can be started by linkage programming of the fire alarm controller in the fire control center.


3. The name of the audible and visual alarm is named according to the alarm mode of the alarm. The audible and visual alarm of Oracle Security Alarm Equipment Factory refers to that the alarm sends out a high decibel alarm sound when an intrusion is found, and the alarm light flashes to deter thieves and remind residents, neighbors and security guards of illegal intrusion.


4. The audible and visual alarm generally forms an audible and visual anti-theft alarm system with infrared detector and door magnet. When the infrared detector or door magnet detects an intrusion, it will immediately send an alarm signal to the audible and visual alarm, and the audible and visual alarm will alarm immediately.


5. The audible and visual alarm is an alarm signal device used in dangerous places to send warning signals to people through sound and various lights, which will not ignite flammable and explosive gases. It can send both audible and visual alarm signals at the same time.


Send Inquiry