Portable foam extinguishers adapted to fire and usage
Scope of application
It is applicable to put out general class B fires, such as oil products, grease and other fires, and also applicable to class a fires, but it can not put out the fire of water-soluble combustible and flammable liquids in class B fires, such as alcohol, ester, ether, ketone and other substances; It is also unable to put out live equipment and class C and D fires.
Principle of fire extinguisher
Principle of fire extinguisher (1 sheet)
How to use: hold the lifting ring on the upper part of the cylinder and rush to the fire site quickly. At this time, it shall be noted that the fire extinguisher shall not be tilted too much, nor shall it be held horizontally or upside down, so as to avoid the mixing of the two agents and spraying in advance. When it is about 10 meters away from the ignition point, the cylinder can be turned upside down. One hand holds the lifting ring tightly and the other hand holds the bottom ring of the cylinder to aim the jet at the combustor. When a flammable liquid fire is extinguishing, if the flow is burning, the foam will be sprayed far and near, so that the foam will be completely covered on the combustion liquid surface. If burning in a container, foam should be directed towards the inner wall of the container, allowing the foam to flow along the inner wall and gradually cover the fire level. Do not directly aim at the liquid surface to spray, so as not to disperse the burning liquid or rush out of the container due to the impact of the jet, so as to expand the combustion range. When putting out a solid fire, the jet should be aimed at the most violent burning place. When the fire distance is shortened, the user should gradually approach the combustion area, and then foam will be sprayed on the combustible until it is extinguished. When in use, the fire extinguisher should always be kept upside down, otherwise the spraying will be interrupted.
Foam fire extinguishers should be kept dry, cool, ventilated and easy to use. They must not be near high temperature or where they may be exposed to fire, so as to prevent carbonation from failure. Anti freezing measures shall be taken in winter to prevent freezing; Dust shall be removed and nozzle shall be dredged frequently to keep it unobstructed.
