Knowledge

Explanation of the working principle of the smoke alarm

Apr 14, 2020 Leave a message

Introduces the concept of smoke alarm, smoke alarm, fire alarm, fire smoke alarm, smoke sensor, smoke sensor, etc. Typically, batteries are powered by a separate physical product battery or AC power battery for backup power. When an alarm is ready, it is called a separate smoke alarm. It can be transmitted over the bus, and there can be multiple connections on the bus. It is connected to a fire alarm controller. Communication forms an alarm system. There was no sound in the field when an alarm occurred. The host has sound and light prompts. The type of smoke alarm is often referred to as a smoke detector. The smoke detector is coded with an address code, but not.


Internally, the smoke alarm prevents fire by monitoring the smoke concentration. For example, langxin smoke alarms use ion smoke sensing internally. It is a technologically advanced and stable sensor that has been widely deployed. A variety of fire alarm systems, performance of long-range gas thermistor, used for fire alarm.


The internal and external ionization chamber has a radiation source 241, where positive and negative ions generated by ionization move to the positive and negative electrodes under the action of the electric field. Under normal circumstances, the current and voltage of the internal and external ionization chambers are stable. If there is smoke, please escape from the ionization room. Interference with the normal motion of charged particles, current and voltage change, thus disrupting the balance between the internal and external ionization chambers, so the wireless transmitter sends a wireless alarm signal notifying the remote receiver to transmit the alarm message.


Send Inquiry